Installing a UV Water Purification Light for Enhanced Safety
Welcome back to Base Camp WNC! In today's blog post, we will be discussing the installation of a UV water purification light. This UV light is an added precautionary measure for water purification, especially in campgrounds. There are other options available, such as a whole house Dalton Rio ceramic filter or a Berkey filter, both of which can remove 99.99% of bacteria in the water. However, in this case, we will be focusing on the installation of a UV light. Before we begin the installation process, it is important to note that filtering the water before it goes through the UV light is crucial. This helps to remove any sediment or impurities in the water. In this particular setup, a spin-down filter, a five-micron filter, and a 20-micron filter are used to filter the water before it reaches the UV light. To start the installation process, the system needs to be drained. This is necessary because we will be cutting into the pipe and mounting the UV light across it. Installation and Considerations for UV Light in Water Treatment System A 2x4 is mounted across the framework to provide support for the UV light. It is important to note that the in and outflow of the UV light can be pointed up or down, but it is recommended to point them down to prevent freezing during winter or when the system needs to be drained. Once the system is drained and the UV light is mounted, the next step is to cut the lines and start gluing them together. The water will flow from the well, through the spin-down filter, the two filters, and into the UV light. From there, it will flow out and go to the house. Now, let's focus on the UV light itself. It is important to choose the right wattage and gallons per minute (GPM) for your setup. In this case, a 55-watt UV tube is used, which is suitable for a 12 GPM treatment. It is crucial to match the wattage and GPM to ensure effective water purification. To install the UV light, a quartz tube and silicone O-rings are provided. Installation and Maintenance Tips for UV Water Purification Lights The quartz tube is inserted into the UV light, and the other end nut is screwed on to secure it. The silicone ring is then pushed in to create a seal. It is important to handle the UV light with clean cotton gloves to prevent any contamination. Once the UV light is in place, the light bulb is plugged into the socket. It is recommended to use a rubber boot to seal the connection and prevent water and moisture from entering. It is important to note that the UV light bulb needs to be replaced annually for optimal performance. After mounting the UV light and plugging it in, it is crucial to fill it with water before turning it on. The UV light can reach temperatures of up to 140 degrees, so it should be placed away from any flammable materials. And there you have it! The UV water purification light is now installed and ready to provide clean and purified water. If you have any questions or need further assistance, feel free to reach out. Don't forget to like, share, subscribe, and leave a comment. Expressing gratitude for your time spent reading Thank you for reading!
0 Comments
Leave a Reply. |
Archives
July 2024
Categories
|