Installing a UV Water Purification Light: Step by Step Guide

Installing a UV Water Purification Light: Step by Step Guide

Welcome back to Base Camp WNC. Today, we embark on an informative journey on how to seamlessly install UV lights in your existing water systems. UV lights are essential for purifying water, ensuring that it is free from harmful microorganisms.

Getting Started with the UV Light System
The UV light system we're focusing on today is a 55-watt, 110-volt unit, designed specifically for the United States. It comes equipped with two holes at each end, accommodating water fittings. Versatility is key with this design; it can be mounted horizontally, vertically, or at any desired angle.
The kit includes a slender glass tube, reminiscent of an elongated test tube. When assembling, slide this tube into the provided ring until it slightly protrudes from the other end. Ensure the ring's pyramid-shaped fixture is correctly aligned to secure the tube. This is a delicate procedure, and I have some tips to prevent the glass tube from breaking.

Assembly Tips

1. Slide the glass tube gently to ensure it doesn't snap.
2. The flange present will accommodate a seal, which when pressed, ensures a tight fit. Just let the glass tube protrude slightly and secure it hand-tight.
3. When sealing both ends of the tube, do not use pliers or exert excessive force. Gentle hand-tightening is sufficient.
4. Water flows between the glass tube and the metal frame, getting purified as it passes by the UV light, before exiting from the other end.

The kit I’m showcasing comes with one glass tube and three UV light bulbs. An important note on the longevity of these bulbs: while they may still emit heat and light after a year, their purification capability diminishes. Hence, an annual replacement is recommended. Handle these bulbs with care and avoid touching them with bare hands.

Installation Essentials
For the perfect fitting, I've innovated with a shower fitting, designed to accommodate the PEX pipe. Applying two wraps of Teflon tape in the direction of the screw ensures a smooth slide. This is especially crucial with PVC components that may have residual bits from the molding process. Add a layer of pipe dope for a tight seal.
The location of installation plays a vital role. In my setup, the spring below the house feeds a tank, which then directs the water towards the house. The UV light system sits in between. To ensure a sturdy installation, mount a board (like a 1 by 4) on the wall as a base.
Once set, the PEX pipe is clamped onto this board with two plastic clips. This setup allows easy access for future maintenance or bulb replacement. The UV light system's transformer has an indicator – a green light – to show it's functioning.

Wrapping Up
Installation can be swift with a bit of experience – it takes me about 15-20 minutes, having installed numerous before. But even if you're new to this, with the right guidance, it's a straightforward process.
Thank you for joining us. If you found this guide useful, please like, share, and subscribe. For any further queries or if you need specialized assistance, feel free to shoot me an email or drop a comment on YouTube.  I offer free advice and guidance online, but consultations or installations at specific locations would be a paid service.

Until next time, stay informed and stay safe!


Visit us at:  Carolina Homestead Planner
We offer services to help with your homestead planning and preparedness needs.